What Does a Pool Filter Do To Clean The Pool?
Usually, pool filters get rid of all dirt particles present in the pool. They filter debris out of the pool; thus, they help you achieve crystal clear pool water. Generally, there are different filter settings on a multiport valve. They include the rinse, waste, closed, backwash, and recirculate setting. All these settings work towards helping you achieve crystal clear pool water.
Filter Setting
More often than not, pool owners use these setting during vacuuming. The setting helps you get rid of all types of debris in the pool. When the filter is under this setting, water from the pool goes into the filter. Then it passes through a filter basket. Here, all dirt gets trapped before the water goes to the pump. Keep in mind that if these dirt particles get into the pump, they will damage it. As the water passes through the sand, all debris gets removed. Then, the filtered water goes back into the pool without any impurities.
Backwash setting on the pool pump
Occasionally, pool professionals advise conducting a pool backwash. If you want to backwash your pool, the filter has to be under a backwash setting. Basically, backwashing means reversing the flow of water in the filter. Doing this prevents the accumulation of dirt particles on the cartridge. Through backwashing, the pressure of water removes all dirt tangling around the cartridge. Once you complete vacuuming the pool, turn the backwash setting on the filter. The water will start flowing in reverse to dislodge all the dirt stuck on the filter when you do this. The dirt removed by the backwash setting often goes out of the pool through the waste pipe. Thus, backwashing boosts the efficiency of the pool filter. In turn, you maintain clear pool water.
Waste setting on the pool filter
Another way to clean the pool is to put your filter on the waste setting. How does the waste setting work? Below are some of the reasons you should consider using the waste setting on your filter.
- The waste setting on your filter helps you lower the pool water. Therefore, it comes in handy when draining the pool. Also, consider using this setting to reduce the amount of water in the pool after heavy rains.
- The waste setting is ideal for filthy swimming pools. If your backyard oasis seems to have a high percentage of dirt and debris, turning on the waste setting will prevent a build-up of dirt on the filter. This is because the dirt particles would go directly out of the pool without passing through the filter.
- Suppose your pool has large algae breeding grounds; consider using the waste setting. In the waste setting, dirt goes out of the pool through the waste pipe without passing through the filter. Therefore, there will be fewer chances of the algae going back to the pool.
Rinse setting on the pool pump
The rinse setting on your pool filter also helps you maintain clean water. Normally, the rinse setting is ideal after backwashing. This setting cleans the sand in a sand filter or the respective filter medium.
The rinse setting on a filter is responsible for getting rid of all the remaining dirt particles in the filter. Also, it helps the sand in a sand filter settle down. Hence, it prepares it for the next function. Pool professionals recommend that you run the pool filter for approximately one minute on the rinse setting. Water used in this setting does not go back into the pool.
Closed setting on the pool filter
Pool filters have a closed setting that is responsible for turning off all water flow. Usually, pool experts advise turning on the closed setting if you plan to leave your pool unused for a certain period. Also, if you want to empty your strainer baskets, consider turning on the closed setting. Turn off the closed setting immediately your pool is back in use. The closed setting helps keep your pool water in good condition even when the pool is not in use.
Are pool filters necessary?
Pool filters are essential for the proper functioning of the pool. This pool equipment gets rid of all dirt and debris from the pool. A pool filter uses various settings to maintain crystal clear water. Some of these settings include the backwash setting, closed setting, filter setting, and waste setting. All these filter settings work in conjunction with each other to keep your oasis in good shape.
Do you need help cleaning your pool filter? Contact Fox Pools today
Although pool filters clean the pool, you need to take good care of them. It is always advisable to hire a pool professional to help you with this. We, Fox Pools, have the best pool service technicians who help you prolong the durability of the filter. We provide the best pool filter cleaning services in the United States. So, do not hesitate to contact us if you need any pool filter cleaning services. Furthermore, we advise you on the best ways to operate the filter.
Leave a Reply
Want to join the discussion?Feel free to contribute!